Vandal Resistant Switches - Stainless Steel - Illuminated
Illuminated - White Ring (3.3v), 22mm, Flat-Round, 2.8mm Solder-tabs (Stainless Steel Momentary Switch)
When only the best will do... The sleek, clean machined lines and lustrous stainless steel texture of the switches give a class to your case unmatched by any other switch on the market. Add to that, distinctive dot or ring illumination in a variety of colours and you have... the ultimate modder's switch.
The extensive range of 'vandal resistant switches' feature quality marine grade stainless steel construction (some models available in [Nickel] chrome-plated brass), come in two illumination styles in a variety of colours, three non-illuminated styles, and offer several different connection alternatives. The switches are very easy to install through simple 19mm diameter holes. Perfect for any chosen location on the modder's dream case.
The atypical double-pole (OFF)-ON/(ON)-OFF (1NO1NC) switch configuration and separate LED terminals allow for a variety of connection and switching alternatives.
Features:
Front Panel Mounting
25mm diameter (22mm mounting hole)
DP Push to Make/Push to Break (Momentary)
5A, 250VAC contact rating Switch
Bright Daylight LEDs (3.3v momentary)
Separate LED Terminals
Ring Illumination or non-illuminated
2.8mm solder tabs/spade connections
Illumination in Blue, Green, Orange, Red, White or Yellow
Optional power and reset engravings (not currently available)
Optional pre-installed motherboard cables for power and reset functions (not currently available)
IMPORTANT
An appropriate resistor 'series' connected to the LED may be required depending on supply voltagerefer to the Specifications below for LED voltage details for each switch. All Illuminated Switches are supplied pre-tested. Absolutely NO returns of switches that have a burnt out LED!
Notes:
Product illustrated may not necessarily represent the product selected.
See the bottom of this page for additional product images including a terminal and connection details.
Refer to product name for details of the selected switch.
Terminals and connections:
Click on the image below for a larger image of the terminals layout and connection details.
Specifications:
| Type | Non-Illuminated | Ring Illuminated |
| Switch Specifications |
| Model | SS2228FM | SS2228FMR |
| Contact Structure | 1NO1NC |
| Button Style | Flat Round |
| Terminals | Solder Tab - 2.8 x 0.5mm |
| Switching | DPST Momentary (ON)-OFF / (OFF)-ON |
| Max. Switch Rating | 5A/250VAC |
| Contact Resistance | ≤50mΩ |
| Insulation Resistance | ≥1000mΩ |
| Dielectric Strength | 2000VAC |
| Operation Temp. | -20°C to +70°C |
| Mechanical life | 1,000,000 cycles |
| Electrical life | 50,000 cycles |
| Contact material | Gold Plated/Silver Alloy |
| Panel Thickness | 1 - 8mm |
| Torque | 5 - 14Nm |
| Operation Pressure | 3 - 8N |
| IP Degree | IP67 |
| Button Material | Stainless steel |
| Body Material | Stainless steel |
| Base Material | PA |
| Dimensions |
| Switch Face | 25mm dia. |
| Mounting Hole (Thread) | 22mm dia. |
| Nut | 34.5mm dia. |
| Body Length | 35.8mm |
| Face Protrusion | 1.8mm |
| Panel Thickness | 8mm max. |
| Diagrams |  
  |
| Lamp Specifications |
| Rated Voltage* | 3.3v | |
| Colours | Blue Green Orange Red White Yellow | |
| Lamp Life | Approx. 40,000 hours | |
| * Lamp contains a current limiting resistor to achieve the specified voltage. |
This product was added to our catalog on Saturday 01 December, 2007.
